HOW TO USE POND MONSTA
1
4
2
3
1. Check head and unclip if required
2. Insert cleaning spike into outlet
to clear air blockage
3. Remove outlet blocking nut to
access outlet elbow if blocked
4. Remove impeller cover clip screws,
open both clips and remove impeller
cover to access impeller chamber.
CLEARING BLOCKAGES
It is normal for your Pond Monsta to require clearing occasionally during operation.
Pond Monsta has been designed so that this will require a minimum of time and effort.
REMOVE
SCREWS
MONSTA COLLECTOR RECYCLING WATER OPTIONS
With the use of the Monsta collector you can either recycle your pond water back into the
pond, or it can go directly into your plant beds as pond water is an excellent feed source for
your plants to grow tall and healthy, or the waste water can go directly into a drain.
Pond Monsta is completely safe to all adult healthy pond fish.
TO POND
If there is a low sludge content -
recycle water back into pond.
TO GARDEN
If there is a high sludge content or
a beneficial partial water change is
required- pump water into garden
border.
TO DRAIN
If there is an excessively high sludge
content - water can be filtered of large
solids and pumped into waste or drain.
ALWAYS TURN POND MONSTA
OFF AT THE MAINS BEFORE
OPENING IMPELLER COVER.
HOW TO USE POND MONSTA
WATER IN
WATER OUT
STORAGE
Adjust Handle
Counter Turn handle
pole & Monsta pole
to lock/unlock
1
/4 Turn
1
/4
Turn
1
2
4
CLEANING COLLECTED
WASTE
STORAGE
MAX FILL LEVEL
Empty Collector Filter when required
!
Remove hose
Recycle waste
to compost
Remove hose
locator
3
Lift
handles
vertically
Cable storage
Wind Cable between
Hose Guide &
Adjustable
Hose/Cable
Plug
R.F. Receiver
Unscrew
hose/cable
locking nut to
adjust height
4
2
1
3
1. Clip in hose locking nut to start
2. Wind hose around reel
3. Insert hose to finish
4. Hanging hook
10 11
Monsta_Instructions_AW.qxd 12/5/09 12:23 Page 13
To Next Page
Loading...