Upper basket
Washing products dispenser
Anti-blocking gauge wire
Lower sprinkler arm
Regenerating salt tank
Waste filter
Main filter
Rinsing product dispenser
Description plate (After-Sales
Ref)
II
HH
GG
FF
EE
DD
CC
BB
AA
7
2/ DESCRIPTION OF YOUR APPLIANCE
EN
6
2/ DESCRIPTION OF YOUR APPLIANCE
EN
On/Off:
Press this button to start your dishwasher :
the screen lights up.
AUTO:
Press this button to select the Automatic pro-
gramme.
Programme selector:
Briefly press one button or the other in suc-
cession to select your programme.
Set:
•
Set the water softerner.
(See 5/ Detergent products and setting the
water softener).
Selection of washing with a
Delayed Start:
Press this button to delay the programme by 3,
6 or 9 hours.
Start/C:
Briefly press this button to start
your programme.
If you make an error, to cancel a selection or
cancel a programme while it is running, hold
down this button for 3 seconds.
The indicator lights:
SSaalltt
:
lit; indicates lack of regenerating salt.
Rinsing liquid:
lit; indicates lack of rinsing product.
Multi-purpose products:
lit; shows you that the “4/1” feature is turned
on and that the programmes are now automa-
tically adjusted if a multi-function tablet is
used.
Programme underway
Time remaining: 45’ - 15’
End: End of programme.
FF
EE
DD
BB
CC
AA
Advice :
A short audible signal (beep) confirm the button’s selection, except for the “On/Off” button.
• GENERAL PRESENTATION OF THE DISHWASHER
Advice :
This user’s guide is applicable to several models. There may be some slight differences
in the details and the equipment between your appliance and the descriptions provided here.
• PRESENTATION OF THE CONTROL PANEL
Fig. 01
AA
BB
CC
DD
EE
FF
GG
HH
II
To Next Page
Loading...
