Operating Instructions EBE 350 E
Safety instructions
2.7 Electrical engineering regulations
Work on electrical equipment or operating materials may only be
undertaken by a skilled electrician or by trained persons under
the guidance and supervision of a skilled electrician as well as
in accordance with the electrical engineering regulations.
Use only extension cable for extending the main cable that are
sized and marked in accordance with the overall power
consumption of the machine and the valid VDE guidelines.
The electrical equipment for the plant must inspected regularly.
Please note in particular the specified recurring inspections
according EN60204-1. Defects such as loose connections or
scorched cables must be rectified immediately. Call a skilled
electrician or our Customer Services.
A second person must be deployed who can pull out the plug in an
emergency if work on live parts is necessary. The work area must be
sealed off using a red and white safety chain and a danger sign. Use
a tool that is insulated against voltages.
Only start work once you are familiar with the electrical engineering
regulations that apply to your area.
Only use voltage seekers that comply with the regulations when
troubleshooting. From time to time check voltage seekers to ensure
that they are operationally efficient.
10
To Next Page
Loading...