Need help?Do you have a question about the Blastrac EBE 350 E and is the answer not in the manual?
Details machine designation, type, and manufacturer.
Provides dimensions (length, width, height, weight) and connected electrical loads.
Defines the intended use and limitations of the EBE 350 E machine.
Guidelines for operating the machine with a generator, emphasizing VDE directives.
Explains the breakdown of the machine's type designation.
Highlights the need for understandable operating instructions and compliance with accident prevention regulations.
Explains the meaning of various denominations and symbols used for highlighting important information.
Details requirements for keeping operating instructions accessible and complying with general regulations.
Outlines duties and requirements for personnel operating or maintaining the machine.
Lists precautions for operating the machine safely under various conditions.
Covers procedures for mechanical and electrical servicing, including safety aspects.
Explains the steps to put the machine into a safe condition for maintenance.
Highlights specific hazards associated with the blast housing outlet and wheels.
Details regulations and precautions for working with electrical components and systems.
Thanks the user and introduces the EBE 350 E blast cleaning machine.
Stresses the importance of reading and understanding the manual for optimum operation and maintenance.
Provides information on the machine's voltage and connection type.
Emphasizes maintenance importance and recommends keeping spare parts.
Lists the items included with the blast cleaning machine.
Explains the machine's components and working principle with diagrams.
Details the control box components, main switch, and indicators.
Explains the function and operation of the shot valve and its handle.
Describes the blast wheel as the core component and its associated parts.
Explains the function of the separator and hopper in the abrasive circuit.
Describes the independent electric drive system and its controls.
Details the front, side, and rear seal systems and their replacement.
Outlines the air system functions and specifications for the fan and dust hose.
Specifies the required abrasive type and discusses selection and applications.
Advises on personnel training before the machine's first use.
Provides instructions for safe transport, including removing abrasive and using suspension eyelets.
Details checks required for the surface to be treated before operation.
Refers to initial operation instructions and emphasizes closing the abrasive valve when not in use.
Points to Chapter 1 for machine dimensions and specifications.
Lists checks and precautions before starting the machine for the first time.
Outlines the sequence for starting the blast cleaning machine and filter unit.
Describes start-up and operation, parallel tracks, and vehicle safety.
Explains the electric drive system and its ON/OFF controls.
Details directional control (joysticks) and speed control adjustments.
Explains the function and operation of the abrasive shot valve handle.
Advises on positioning and shows recommended blast paths.
Provides a step-by-step guide for safely shutting down the machine and filter unit.
Instructions for fault diagnosis, safety shutdown, and restarting after a fault.
Stresses regular maintenance and adherence to safety instructions for operational safety.
Lists inspection points and maintenance tasks based on operating hours or time periods.
Advises on initial repairs with manufacturer personnel and stocking spare parts.
Explains how the control cage affects the blast pattern and the importance of correct adjustment.
Emphasizes correct adjustment for a uniform blast pattern and safety before repair work.
Details how to adjust the control cage for optimal blast pattern, including standard values.
Lists blast wheel parts and liners subject to wear.
Provides instructions for replacing worn blast wheel blades and impeller.
Details the procedure for changing the top, left, and right liners.
Refers to electrical circuit diagrams for the 350-9110-UNI system.
Refers to electrical circuit diagrams for the 350-3006-E drive system.
Lists common faults related to the blast machine, their possible causes, and remedies.
Lists common faults related to the electrical system, their possible causes, and remedies.
Lists spare parts for blast housing, seals, blast wheel, liners, separator, hopper, fan unit, drive system, and controls.
General| Brand | Blastrac |
|---|---|
| Model | EBE 350 E |
| Category | Shot Blasting Machines |
| Language | English |
To Next Page