Operating Instructions EBE 350 E
General
3.1 Introduction
ISPC Blastrac/EBE wants to thank you for your decision to employ
the blast cleaning machine EBE 350 E for the treatment of horizontal
surfaces.
The machine has a closed abrasive circuit with dust separation. This
comprehensively avoids damaging the environment and endangering
the operating staff.
The EBE 350 E is designed to remove coatings, non-skid, epoxy,
bitumen and asphalt on different types of horizontal surfaces.
3.2 Operating instructions
This manual has been written to support the operating personnel on
learning the functioning of the machine and to guarantee optimum
operation and maintenance.
Therefore it is important that all persons operating and
maintaining the machine read this manual carefully and
understand it fully.
The supplied machine has been manufactured for being employed in
the user’s country. All descriptions and notes have been formulated in
the language of the user’s country or in English in accordance with
the statutory regulations, or shown as pictograms. If the customer
deploys personnel with little knowledge of the language of the user’s
country, appropriate instruction and training must be provided.
Before using the machine personnel must be familiar with how
to operate the machine, with all important components, with the
method of working and with its dimensions.
ISPC Blastrac/EBE offers a course on the use of the machine in
order to make the operating and maintenance personnel familiar with
all elements of the blast cleaning machine.
2
To Next Page
Loading...