EBE 350 E Operating Instructions
General
Initial commissioning of the machine must be carried out very
carefully. The machine operator must fully understand the sequence
of commissioning of the individual parts and their functioning.
ll persons in the proximity of the machine in operation must wear
ear protectors, safety glasses with lateral protection and safety
shoes. The machine operator must wear close-fitting protective
clothing.
3.3 Connections
Machine Voltage Connection type
EBE 350 E 400-480V 50/60Hz 32A
3.4 Care and maintenance
Special attendance and regular maintenance of the machine and its
parts are imperative for functioning and safety.
In order to prevent unnecessary downtimes it is recommended to
keep original spare and wear parts on stock as listed in the
maintenance box.
A list of contents of the maintenance box is provided in Chapter 10 to
enable the above-mentioned work to be carried out quickly.
WARNING: BLASTRAC EBE machines build for the American
market are especially build to run on 440-480V 60Hz. If the
machines are operating on a Voltage or Hz lower than 440V and
60Hz, this will damage the electric components.
3
To Next Page
Loading...