Operating Instructions EBE 350 E
Transport
4.1 General notes
Before the machine is used for the first time, ISPC Blastrac/EBE
authorised dealers offer a course to familiarise maintenance and
operating personnel with all elements of the machine. We are not
liable for damage caused by incorrect use of the machine by
personnel not trained by ISPC Blastrac/EBE.
4.2 Transport
When transporting the machine proceed in such a manner that
damage due to the effects of the use of force or incorrect loading and
unloading is avoided.
Remove the abrasive from the machine before it is transported. The
machine may only be lifted by using the suspension eyelets. The
weight and dimensions of the machine are shown in Chapter 1
"Technical data“.
Fig. 4.1
The machine is to be transported after being separated into:
Machine
Filter unit
General accessories
2
To Next Page
Loading...