Operating Instructions EBE 350 E
Initial operation
; Fill approx. 25 kg of the selected abrasive (see Chapter 3.14)
into the abrasive storage hopper of the blast cleaning machine.
The shot valve must be closed whilst doing this.
Fill in abrasive here!
Abrasive control lever
in ”CLOSED”
(downwards) position!
Fig. 5.1
; Check that the filter dust container has been emptied.
5.2 Initial operation
All persons in the proximity of the machine must wear ear
protectors, safety glasses with lateral protection as well as
safety shoes. The operator is obliged to wear close-fitting
protective clothing.
The start of the blast cleaning machine and the filter unit is effected in
the following sequence:
1 Switching on the filter unit
Main switch of the filter unit "ON".
4
To Next Page
Loading...