Operating Instructions EBE 350 E
General
3.14 Abrasive media
In order to operate the ISPC Blastrac/EBE machine EBE 350 E you
need hardened (max. 45 Rockwell), spherical abrasive. The machine
EBE 350 E has been especially designed to be operated with ISPC
Blastrac/EBE abrasive.
The ISPC Blastrac/EBE abrasive is of very high quality and owns the
rebouncing ability required for the efficient use of model EBE 350 E.
The selection of the abrasive is very important since this is the material
to carry out the surface treatment.
Fig. 3.13
18
To Next Page
Loading...