Need help?Do you have a question about the BLAUBERG VENTO Expert A50-1 W V.3 and is the answer not in the manual?
Details the technical specifications for the unit's Wi-Fi connectivity.
Provides a template and dimensions for marking fan mounting holes.
Illustrates the configuration of internal ventilator components within the wall.
Presents a wiring diagram for external connections and power supply.
Explains how to configure the ventilator using DIP switches.
Explains how to use the physical buttons on the indoor unit for control and status indication.
Information regarding the filter indicator and reset procedure.
Explains the alarm indicator and potential causes of alarms.
Describes the function of the 'Master' unit in a network configuration.
Explains the timer functions (Party, Night) accessible via the remote control.
Step-by-step instructions for connecting the mobile device to the ventilator.
Details the functions of various control buttons within the mobile application.
Explains the meaning of different indicators displayed in the mobile application.
Explains different Wi-Fi operation modes like Access Point and Client.
How to enter special setup mode for password recovery or reset.
Instructions for replacing the battery in the remote control.
Step-by-step guide for disconnecting the connector from the control board.
Procedure for replacing the battery in the remote control unit.
General| Airflow | 50 m³/h |
|---|---|
| Mounting | Wall-mounted |
| Operating temperature | -20 °C to +50 °C |
| Duct diameter | 160 mm |
| Protection Class | IP24 |
| Housing Material | Plastic |
| Filter | G3 |
| Control | Remote control, smartphone |
| Voltage | 230 V |
| Speed | 3 |
To Next Page
