What to do if my BLAUBERG VENTOErgo A50-1 Pro V.3 Fan has low air flow?
If the BLAUBERG Fan exhibits low air flow, first, try setting a higher fan speed. If the issue persists, the filters, fan, or regenerator might be clogged. In this case, clean or replace the filter and clean the fan and the heat exchanger.
How to fix a BLAUBERG Fan that won't start?
If the BLAUBERG Fan does not start, check the power supply line to ensure it is correctly connected. If the connection is correct, troubleshoot for any motor jam or impeller clogging. If necessary, clean the blades and then try turning the fan on again.
Why is my BLAUBERG Fan making noise and vibrating?
If you notice noise or vibration from your BLAUBERG Fan, start by cleaning the impeller. If the issue continues, check for loose screw connections on the unit casing or the outer ventilation hood and tighten them.
What to do if BLAUBERG Fan trips the circuit breaker?
If the circuit breaker trips during the BLAUBERG Fan start-up, this may indicate overcurrent due to a short circuit in the electric line. Turn the ventilator off and contact the Seller for further information.
Lists all components included in the ventilator package, such as indoor unit, air duct, regenerator, hood, and manual.
Explains the meaning of each part of the VENTO Ergo A50/85-1 Pro V.3 model designation.
Explains how to connect multiple ventilators in series, detailing wiring and control connections.
Instructions for cleaning the fan blades and impeller annually using a soft brush, cloth, or vacuum cleaner.
Guidance on replacing the CR2025 battery in the remote control when it shows no response.
Specifies conditions for storing and transporting the unit, including temperature, humidity, and handling precautions.
Fields to record seller's address, phone, email, purchase date, and customer signature.
Area to document installation details like company name, address, technician, date, and signature, confirming compliance.
Fields for unit type, model, serial number, manufacture date, purchase date, warranty period, and seller.
General| Airflow | 50 m³/h |
|---|---|
| Frequency | 50/60 Hz |
| Mounting | Wall-mounted |
| Filter class | G3 |
| Protection class | IP24 |
| Housing material | Plastic |
| Control | Remote control |
| Operating temperature | -20 to +50 °C |
| Current | 0.04 A |
| Noise level | 21-29 dB(A) |
To Next Page
