32
Switching hicut on/off
➮ Press the MENU button <.
“MENU” appears in the display.
➮ Keep pressing the button :
until “HICUT” appears in the
display.
➮ Press the or button : to
switch HICUT on/off.
“HICUT 0” means that treble will not be
reduced; “HICUT 1” means that treble
will be reduced.
➮ Press the MENU button <.
Traffic information
reception
Switching traffic information
priority on/off
➮ Press the TRAFFIC button >.
Priority for traffic announcements is ac-
tivated when “TRAFFIC” lights up in the
display.
Note:
You will hear a warning sound:
● if you leave the reception area of a
traffic information station that you
are currently listening to.
● if, while listening to a CD, you leave
the reception area of a traffic
information station that you are
tuned into and the subsequent
automatic search cannot find a
new traffic information station.
● if you retune the radio from a traffic
information station to a station that
does not broadcast traffic informa-
tion.
If you hear the warning sound, you can
either switch off traffic information pri-
ority or tune into a station that broad-
casts traffic information.
Setting the traffic
announcement volume
➮ Press the MENU button <.
➮ Press the button : until “TA
VOLUME” appears in the display.
➮ Set the required announcement
volume using the
and buttons
:.
TRAFFIC INFORMATIONRADIO MODE
To Next Page
Loading...
