38
Audio settings
Bass settings
➮ To set the bass, press the AUDIO
button 9.
“BASS” appears in the display.
➮ Press the or button : to
adjust the bass.
Treble settings
➮ To set the treble, press the AUDIO
button 9.
“BASS” appears in the display.
➮ Press the AUDIO button 9 again.
“TREBLE” appears in the display.
➮ Press the or button : to
adjust the treble.
Switching loudness on/off
If loudness is activated, the bass and
treble levels are aurally compensated,
i.e. they are increased at lower volume
levels.
➮ Press the AUDIO button 9 for
approximately 2 seconds.
LD lights up in the display when loud-
ness is switched on.
Setting loudness intensity
The loudness level can be set in steps
ranging from 1 to 6.
➮ Press the MENU button <.
➮ Keep pressing the button :
until “LOUDNESS” appears in the
display.
➮ Press the or button : to set
the level.
➮ Press the MENU button <.
Volume distribution
settings
Balance settings
➮ To set the balance, press the GEO
button ;.
“BAL” appears in the display.
➮ Press the or button : to
adjust the balance (right/left).
Fader settings
➮ To set the fader, press the GEO
button ;.
“BAL” appears in the display.
➮ Press the GEO button ; again.
“FADER” appears in the display.
➮ Press the or button : to
adjust the fader (front/back).
VOLUME DISTRIBUTIONAUDIO SETTINGS
To Next Page
Loading...
