3737
ENGLISH
DEUTSCH
FRANÇAIS
ITALIANO
NEDERLANDS
SVENSKA
ESPAÑOL
PORTUGUÊS
Time (CLOCK)
Displaying the time
➮ To briefly display the time, press
the MENU button < until the time
appears in the display.
Setting the time manually
The time is set automatically using the
RDS signal. However, if you cannot re-
ceive any RDS stations or the RDS sta-
tions that you listen to do not support
this feature, you can also set the time
manually.
➮ Press the MENU button <.
➮ Keep pressing the button :
until “CLOCKSET” appears in the
display.
➮ Press the button :.
The time appears in the display. The
minutes flash on and off and can be
adjusted.
➮ Set the minutes using the and
buttons :.
➮ Once you have set the minutes,
press the
button :. The hours
now flash on and off.
➮ Set the hours using the and
buttons :.
➮ When you have finished making
your changes, press the MENU
button <.
Selecting 12/24-hour clock
mode
➮ Press the MENU button <.
“MENU” appears in the display.
➮ Keep pressing the button :
until “24 H MODE” or “12 H MODE”
appears in the display.
➮ Press the or button : to
switch between the modes.
➮ When you have finished making
your changes, press the MENU
button <.
Displaying the time when the
unit is off
➮ To display the time when the unit is
turned off, press the MENU button
<.
“MENU” appears in the display.
➮ Keep pressing the button :
until “CLOCK OFF” or “CLOCK
ON” appears in the display.
➮ Press the or button : to
switch between the settings.
➮ When you have finished making
your changes, press the MENU
button <.
CLOCK
To Next Page
Loading...
