Blaupunkt AMSTERDAM 290 BT - Installation; Removing the unit; Removing the trim plate

01_AMSTERDAM 290_1 08.04.2019
16
Installation
4
Fix a cable with a commercial item of tape.
NOTE
• Swap the clips if necessary.
Removing the trim plate
Pull the trim plate forward.
Removing the unit
1) Remove the trim plate by referring to step 1 in
“Removing the trim plate”.
2) Insert the extraction key (accessory 2 ) deeply into
the slot as shown. (The protrusion at the tip of the
extraction key must face toward the unit.)
2
3) With the inserted extraction key secured, insert the
other extraction key into the slot.
2
4) Pull out the unit halfway.
NOTE
• Be careful to avoid injury from the catch pins on the
extraction key.
5) Pull the unit all the way out with your hands, being
careful not to drop it.