Need help?Do you have a question about the Blaupunkt BP 5.0 and is the answer not in the manual?
General| Touch Screen | Yes |
|---|---|
| Bluetooth | Yes |
| USB | Yes |
| Micro SD | Yes |
| Aux Input | Yes |
| Compatible with Steering Wheel Controls | Yes |
| Screen Size | 5 inches |
| Display Size | 5 inch |
| Video Format | AVI/MP4 |
| Audio Format | MP3/WMA |
| Image Format | BMP |
| Resolution | 800x480 |
Insert a microSD card (4GB-64GB). Format new cards on the camcorder.
Fully charge camcorder for initial use by car charger, PC USB port, or USB adapter. Indicator shows charging status.
Instructions on how to power on, record, play back, and power off the camcorder.
Details the eight camcorder menu settings: Playback, Action Cam, Dash Cam, WiFi, Voice Record, Auto Record, Screen Auto Off, and Settings.
Steps to connect the camcorder to a PC via Micro USB cable to transfer, manage, or playback video files.
Instructions for connecting the camcorder to a TV using a Micro HDMI cable for simultaneous display.
Explains the 'Local' function for direct mobile control via WiFi, including live view, album management, and setup.
Details the 'Internet' function for cloud server connection to view live videos remotely.
Guide on how to connect the mobile device to the camcorder using the 'Local' WiFi function for remote control.
Step-by-step instructions for connecting Android and iOS devices to the camcorder via Wi-Fi.
Describes functions for viewing and saving videos/photos, including Quad-View and upside-down image options.
Allows viewing or deleting video files recorded in action cam or dash cam modes.
Configure camcorder settings, network details, and car DVR settings like motion detection.
Guide to format the SD card for first-time use or after reformatting for Action Cam and Dash Cam allocation.
Steps to set up Email and AP (Access Point) for internet cloud service connection.
Configure the camcorder to automatically record when motion is detected after the car engine stops.
Enable the G-Sensor to automatically record emergency events upon detecting impacts.
Enable cloud connection for video streaming and view connection status on screen.
Steps to view live videos remotely via WiFi, 3G/4G, after connecting to the internet and the app.
Solution: Power is low, recharge the battery.
Solution: Press and hold the power button for 5 seconds to force shutdown, then press again to turn on.
Check microSD card status (full, unrecognized) or format/replace it.
Verify AP name, password, WiFi signal, or firewall settings.
Ensure camcorder WiFi is enabled and selected in mobile Wi-Fi settings.
Check WiFi signal, ensure camcorder is not recording or occupied.
Verify mobile 3G/4G or WiFi internet connection.
Ensure sufficient internet bandwidth for upload/download.
Reset camcorder to factory defaults via Settings menu.
Insert the GPS receiver into the camcorder device.
Connect camcorder to PC via USB, find Setup.exe in 'Removable Disk\DCIM' and install.
Use 'Unieye Map' software with SD card to view videos, requiring an active internet connection for Google Maps.
Displays video locations on a map, marking start and end points.
Shows speed information from video records, switchable between KPH and MPH.
Displays the moving direction from the records of the video.
Navigate months, view video dates, and click color lines for playback.
Switch between Windows mode and Full Screen mode for viewing video and map.
Toggle map and video display between parent and child windows.
To Next Page