Motion Detector Setup
G-Sensor Setup
When car's engine stops and motion is detected,
camcorder automatically records videos till no
motion is detected.
When camcorder is recording and any impacts happen, camcorder
automatically records emergency events if G-Sensor is set.
1. Set Camcorder to dash cam mode.
2. Go to APP
[Setup] [ Car DVR Settings]
Turn on [Motion Detector] Tap [Save].
Go to APP
[Setup] [ Car DVR Settings]
Select [G-Sensor], [H]/[L] Tap [Save].
Note : [H] High sensitivity. [L] Low sensitivity.
3. Camcorder shows
on screen.
4. When car's engine stops, operate camcorder
to active [ Motion Detector].
To Next Page
Loading...
