A12
13
- In this mode, you may have to wait for a few minutes before the appliance starts
giving out hot air.
- In this mode, the fan may operate for short periods, even though the set
temperature has already been reached.
FAN MODE
When using the appliance in this mode, the air hose
does not need to be attached.
To set this mode correctly:
• Press the M button a number of times until the
symbol appears.
• Select the required fan speed by pressing the
button.
Three speeds are available:
Maximum speed: to achieve the target temperature as rapidly as
possible.
Medium speed: reduces noise levels but still maintains a good level of
comfort.
Low speed: for silent operation.
DRY MODE
Ideal to reduce room humidity (spring and autumn,
damp rooms, rainy periods etc.).
In dry mode, the appliance should be prepared in the
same way as for cool mode, with the air exhaust hose
attached to enable the moisture to be discharged
outside.
To set this mode correctly:
To Next Page
Loading...
Need help?
General
