A12
14
• Press the M button a number of times until the symbol appears.
• Select the required fan speed by pressing the button.
Three speeds are available:
Maximum speed: to achieve the target temperature as rapidly as
possible.
Medium speed: reduces noise levels but still maintains a good level of
comfort.
Low speed: for silent operation.
Switch the unit of temperature
When the appliance is standby, press the M button 20 seconds, then you can
change the unit of temperature.
For example:
Before change, in cool mode, the screen display like fig E.
After change, in cool mode, the screen display like fig F.
To Next Page
Loading...
Need help?
General
