www.blaupunkt.com
ARRIFANA 15 23
To program the time start, the appliance should be off.
Press TIMER button, set the temperature with pressing the key or .
Press TIMER again, set the time with pressing the key or . Press the
key more times till on the display you can read the timed start.
IMPORTANT!
Before proceeding with the timed start:
Program the working mode with the MODE button and the fan speed with
the FAN button.
Switch the conditioner off with the ON/OFF button.
Note: To cancel the set function, press the TIMER button again.
Note: In case of power off, it is necessary to set TIMER ON again.
PROGRAMMING SHUTDOWN
The timed stop is programmed with the appliance
on. Press TIMER button, set the time pressing the
key or , press the key more times till on the
display you can read the time which passes
between the programming and the timed stop.
Note: To cancel the set function, press the TIMER
button again.
Note: In case of power off, it is necessary to set TIMER OFF again.
Note: While the time was right settled,
the TIMER function of this remote(clock
function) can set half hours.
To Next Page
Loading...
Need help?
General
