21
Bluetooth®
Starting Bluetooth® streaming via app control
쏅 Press the SRC button
?
repeatedly until the
display shows "ANDROID".
The playback starts.
During the playback, the display shows ID3
tag information, such as title, artist, album
name, etc. In addition, the Android logo
appears.
The "Android Music Player Series 230" app allows
not only an operation using the buttons of the
car sound system, but it also subdivides the mu-
sic titles in certain music categories based on the
ID3 tag information. As a result, you can quickly
and easily select music titles via the browse mode
of the car sound system (see chapter "CD/MP3/
WMA/iPod mode", section "Browse mode").
Notes:
• The Bluetooth® streaming mode via
" Android Music Player Series 230" app is
available only for Android cell phones with
operating system Android 2.3 and higher.
In addition, the cell phone must be com-
patible with the Bluetooth® pro les SPP
(Serial Port Pro le) and A2DP (Advanced
Audio Distribution Pro le).
• A list of Android cell phones with veri ed
compatibility is located on the Internet
under www.blaupunkt.com. Blaupunkt
cannot guarantee the awless function of
other Android cell phones.
• If the connection to the cell phone is lost
during playback, the display brie y shows
"DISCONNECTED" and the car sound sys-
tem changes to the previous audio source.
Additional functions in the
Bluetooth® menu
Changing the Bluetooth® PIN
The factory-set Bluetooth® PIN of the car sound
system is "1234"; e.g. it must be entered on the
cell phone when pairing a cell phone. This PIN can
be changed.
쏅 In the Bluetooth® menu, select the "PIN EDIT"
menu item.
쏅 Press the On/O button
3
to open the entry
menu.
You can now enter the PIN:
쏅 Turn the volume control
4
to select a digit
for the respective position.
쏅 Press the
or button
7
to reach the next
or previous position.
Notes:
• You can also reach the next position by
pressing the ON/O button
3
.
• While entering the PIN, you cannot change
the volume or mute the car sound system.
쏅 Press the
button
7
repeatedly until you
reach past the last position to con rm the PIN
entered and return to the Bluetooth® menu.
Managing paired devices
The paired Bluetooth® devices can be managed in
the Bluetooth® menu.
The device list shows the Bluetooth® names or
addresses of the paired devices. You can do the
following:
• Disconnecting the connection to the currently
connected Bluetooth® device
• Establishing a connection to one of the paired
Bluetooth® devices
• Unpairing Bluetooth® devices
쏅 In the Bluetooth® menu, select the "PHONE
LIST" menu item.
쏅 Press the On/O button
3
to open the
device list.
The rst device on the list is displayed.
Note:
If no device is paired, "EMPTY LIST" is brie y
displayed.
쏅 Turn the volume control
4
to select a di er-
ent device.
To Next Page
Loading...
