Blaupunkt BARCELONA 230 - Advanced User and Factory Settings; Factory Settings Reset

29
User settings | Factory settings
BROWSE
Switching fast track selection in browse mode on
or o using the volume control
4 and the On/O
button 3 . Settings: ON, OFF.
쏅 Press the On/O button
3 to change the
setting.
쏅 Turn the volume control
4 to change
between the settings.
SCAN TIME
Setting the scan time in seconds. Settings:
4/8/12/16/60 seconds.
쏅 Press the On/O button
3 to change the
setting.
쏅 Turn the volume control
4 to change
between the settings.
SWC (Steering Wheel Control con guration)
Con guring the buttons of a connected steering
wheel control.
쏅 Press the On/O button
3 to open the
menu.
쏅 Turn the volume control
4 to change
between the functions.
쏅 Press the On/O button
3 to select a func-
tion.
쏅 Press the corresponding button on the steer-
ing wheel control for approx. 1 second to pro-
gram the button with the selected function.
VERSION
Displaying the current software version of the
radio.
쏅 Press the On/O button
3 to open the
menu.
쏅 Turn the volume control
4 to change
between the display of the version number
of system software and Bluetooth software.
NORMSET
Restoring the original factory settings of the car
sound system.
쏅 Press the On/O button
3 .
The display shows "PRESS
>
TO CONFIRM".
쏅 Press the
button 7 to con rm the reset-
ting.
The car sound system switches o and is re-
set to the factory settings. If a CD has been
inserted in the CD drive, the car sound system
automatically switches on again (Barcelona
230 only).
Factory settings
Important factory settings in the user menu:
Menu item Factory setting
AREA EUROPE
FM2 / FMT / AM / AMT ON
RDS AF* ON
REGIONAL* OFF
TRAFFIC* OFF
SEEK SENS HIGH
PTY** OFF
ON VOLUME 20
TA VOLUME* 20
BEEP ON
BROWSE ON
SCAN TIME 8SEC
DIM MODE MAN
HOUR MODE 24H
SET CLOCK 00:00
* Only in reception area "EUROPE"
** Only in reception areas "EUROPE" and "USA"
In the user menu, you can restore the original
factory settings of the car sound system (see the
chapter "User settings", section "Making settings
in the "VARIOUS" menu", menu item "NORMSET").