To Next PageTo Next Page
Need help?Do you have a question about the Blaupunkt Bahamas MP46 and is the answer not in the manual?
General| Display Type | LCD |
|---|---|
| Bluetooth | Yes |
| USB Ports | 1 |
| Max Power Output | 4 x 50 W |
| Radio Tuner | Yes |
| Supported Formats | MP3, WMA |
| Tuner Bands | FM, AM |
| USB | Yes |
| AUX Input | Yes |
| Microphone Input | Yes |
| Steering Wheel Control | Yes |
| Equalizer | Yes |
| Subwoofer Output | Yes |
| Media Playback | USB |
| Output Power | 4 x 20 Watts RMS |
Description and operation of the On/Off button for device control.
Step-by-step guide on how to detach the control panel.
Step-by-step guide on how to attach the control panel.
Setting the device's auto-off timer after opening the control panel.
Various ways to switch the device on and off, including by ignition.
Instructions for increasing or decreasing the audio volume.
Configuring the initial volume level when the device powers on.
Quickly reducing the volume to a preset level (Mute) and cancelling it.
Adjusting volume for phone calls and navigation voice output.
Setting the radio tuner region for optimal reception.
Procedure for selecting and starting CD playback mode.
Pausing and resuming CD playback.
Procedure for safely removing a CD from the device.
Introduction to playing MP3 and WMA music files from CDs.
Activating MP3 mode similar to standard CD mode.
Pausing and resuming MP3 playback.
Selecting the CD-changer as the audio source.
Navigating between different CDs loaded in the changer.
Choosing specific tracks from the selected CD in the changer.
Pausing and resuming playback from the CD-changer.
Adjusting the hours, minutes, and seconds for the clock.
Adjusting bass frequency and level for different sound profiles.
Adjusting middle frequency and level for sound tuning.
Adjusting treble frequency and level for desired sound output.
Adjusting the balance between left and right speakers.
Adjusting the volume balance between front and rear speakers.
Adjusting sub-out level and cutoff frequency for external amplifiers.
Setting the output level for the subwoofer.
Enhancing bass at low volumes using the X-BASS feature.
Setting the intensity of the X-BASS bass boost.
Selecting pre-programmed equalizer settings for different music genres.
Setting brightness levels for day and night, including auto-dim.
Mixing custom colours or selecting from colour scan for illumination.
Enabling or disabling the AUX audio input.
Essential safety guidelines for installing the car audio system.
