26
Sound
You can perform the sound settings (Bass,
Middle, Treble and Sub-out) separately for
every source (Radio, CD, CD changer, AUX,
Telephone/Navigation). The volume distri-
bution settings (Balance and Fader) apply
to all the audio sources.
Note:
The settings of the sound for traffi c
announcements and telephone/
navigation can only be made during a
telephone call/voice output.
Adjusting the bass
You can select 1 of 4 centre frequencies
(60 Hz, 80 Hz, 100 Hz, 200 Hz). In additi-
on, you can adjust the level between ±7 for
the selected centre frequency.
Adjusting centre frequency and level
Press the AUDIO button 5.
“BASS” appears on the display.
Press the
or button : once to re-
ach the BASS submenu.
Press the
or button : repeatedly
until the desired centre frequency
appears on the display.
Press the
or button :, to adjust
the level between ±7.
Press the AUDIO button 5 twice to
exit the menu.
쏅
쏅
쏅
쏅
쏅
Adjusting the middle
You can select 1 of 4 centre frequencies
(500 Hz, 1 kHz, 2 kHz, 3 kHz). In addition,
you can adjust the level between ±7 for the
selected centre frequency.
Adjusting centre frequency and level
Press the AUDIO button 5.
“BASS” appears on the display.
Press the
or button : repeatedly
until “MIDDLE” appears on the display.
Press the
or button : once to re-
ach the MIDDLE submenu.
Press the
or button : repeatedly
until the desired centre frequency
appears on the display.
Press the
or button : to adjust
the level between ±7.
Press the AUDIO button 5 twice to
exit the menu.
Adjusting the treble
You can select 1 of 4 centre frequencies (10
kHz, 12 kHz, 15 kHz, 17 kHz). In addition,
you can adjust the level between ±7 for the
selected centre frequency.
Adjusting centre frequency and level
Press the AUDIO button 5.
“BASS” appears on the display.
Press the
or button : repeatedly
until “TREBLE” appears on the display.
Press the
or button : once to
reach the TREBLE submenu.
쏅
쏅
쏅
쏅
쏅
쏅
쏅
쏅
쏅
Sound
BA_BahamasMP46_EN.indd 26BA_BahamasMP46_EN.indd 26 4/5/06 9:00:22 AM4/5/06 9:00:22 AM