32
To start the seek tuning again,
Press the
or button :.
If you found the desired colour,
Press the MENU button 9 twice.
쏅
쏅
External audio sources
If no CD changer is connected to the device,
you can connect an external audio source.
Audio sources can, for example, be por-
table CD players, MiniDisc players or MP3
players.
If you want to connect an external audio
source, you will need an adapter cable. You
can obtain this cable (Blaupunkt no.: 7 607
897 093) from your Blaupunkt dealer.
The AUX input must be activated in the
menu.
Note:
If no CD changer is connected to the
device, the AUX menu item cannot be
selected.
Switching the AUX input on/off
Press the MENU button 9.
Press the
or button : repeatedly
until “AUX MENU” appears on the
display
Press the
button : to open the
menu.
Press the
or button : repeatedly
until “AUX OFF” or “AUX ON” appears
on the display.
Use the
or button : to select
between the options “AUX ON” and
“AUX OFF”.
When you have fi nished making your
changes,
Press the MENU button 9 twice.
쏅
쏅
쏅
쏅
쏅
쏅
Display External audio sources
BA_BahamasMP46_EN.indd 32BA_BahamasMP46_EN.indd 32 4/5/06 9:00:24 AM4/5/06 9:00:24 AM
To Next Page
Loading...
