Blaupunkt Bahamas MP46 - CD Playback Features; Selecting Tracks; Random Track Play (MIX)

15
ENGLISH
The drive draws in the CD automatically.
You must not hinder or assist the drive as it
draws in the CD.
Gently close the control panel whilst
exerting a little pressure until you feel
it click into place.
The CD starts playing and “CD” appears on
the display.
Note:
If the vehicle ignition was switched
off prior to inserting the CD, you must
switch the device on fi rst with the but-
ton 1 to start the playback.
If a CD is already inserted in the drive,
Press the SOURCE button 4 repea-
tedly until “CD” appears on the display.
Playback begins from the point at which it
was last interrupted.
Selecting tracks
Press one of the arrow buttons : to
select the next or previous track.
If you press the
or button : once, the
player will play the current track again from
the beginning.
Fast track selection
To quickly select tracks backwards or for-
wards,
Press and hold down the
or button
: until fast track selection backwards
/ forwards begins.
쏅
쏅
쏅
쏅
Fast searching (audible)
To fast search backwards or forwards,
Press and hold down the
or button
: until fast searching backwards / for-
wards begins.
Random track play (MIX)
Press the 5 MIX button ;.
“MIX DISC” appears briefl y on the display
and the MIX symbol is displayed. The
next randomly selected track will then be
played.
Cancelling MIX
Press the 5 MIX button ; again.
“MIX OFF” appears briefl y on the display
and the MIX symbol disappears.
Scanning tracks (SCAN)
You can scan (briefl y play) all the tracks on
the CD.
Press the MENU button 9 for longer
than 2 seconds.
“SCAN DISC” apears briefl y on the display,
and the next track will then be scanned.
Note:
You can set the scanning time. For
further information, please read the
section entitled “Setting the scanning
time” in the “Radio mode” chapter.
쏅
쏅
쏅
쏅
CD mode
BA_BahamasMP46_EN.indd 15BA_BahamasMP46_EN.indd 15 4/5/06 9:00:20 AM4/5/06 9:00:20 AM