Blaupunkt Bahamas MP46 - CD-Changer and Clock Functions; Pausing CD-Changer Playback; Clock Time Display; Setting the Clock Time

24
Cancelling MIX
Briefl y press the 5 MIX button ;.
“MIX OFF” appears and MIX on the display
disappears.
Scanning all tracks on all CDs
(SCAN)
To scan (briefl y play) all the tracks on all the
inserted CDs in ascending order,
Press the MENU button 9 for longer
than 2 seconds.
“SCAN TRACK” appears on the display, CD
number and track number are displayed,
and the number of the current track
fl ashes.
Stopping Scan
To stop scanning,
Briefl y press the MENU button 9.
The currently played track will then conti-
nue to be played normally.
Note:
You can set the scanning time. For
further information, please read the
section entitled “Setting the scanning
time” in the “Radio mode” chapter.
Interrupting playback (PAUSE)
Press the 3 button ;.
“PAUSE DISC” appears on the display.
Cancelling pause
During the pause, press the 3
button ;.
Playback is continued.
쏅
쏅
쏅
쏅
쏅
Clock time
Displaying the time
To briefl y display the time,
Press the DISPL
button 8 for more
than 2 seconds.
The time is briefl y displayed.
Setting the time
To set the time,
Press the MENU button 9.
Press the
or button : repeatedly
until “CLOCK MENU” appears on the
display.
Press the
button : to open the
menu.
Press the
or button : repeatedly
until “CLOCK SET” appears on the dis-
play.
Press the
button : to open the
menu.
The time appears on the display. The hours
and seconds can be adjusted.
Set the time with the
or
button :.
To switch between hours and minutes,
Press the
or button :.
When you have fi nished making your
changes,
Press the MENU button 9 three
times.
쏅
쏅
쏅
쏅
쏅
쏅
쏅
쏅
쏅
CD-changer mode Clock time
BA_BahamasMP46_EN.indd 24BA_BahamasMP46_EN.indd 24 4/5/06 9:00:22 AM4/5/06 9:00:22 AM