10
3. Main screens
3.1 Navigation screen
GPS Signal: Indicates the status of the GPS reception.
GPS signal is not sufficiently strong to allow positioning. Signals are being received from fewer than 3
satellites.
GPS signal is sufficiently strong to allow positioning. Signals are being received from 3 satellites.
A high-quality GPS signal is being received that allows your elevation to be determined. Signals are being
received from at least 4 satellites.
GPS Status
All navigation programs require sufficient satellite coverage in order to continuously determine your current
location using a GPS (Global Positioning System) signal. You can learn how to check the GPS status of your
device in Section 12.4.2.
Note: The first time the device is turned on it may take a few minutes to recognise the GPS position. Your
position will be recognised more quickly when the device is turned on on subsequent occasions.
Profile: Shows you which profile you have selected.
Battery: The battery status and the charging process are shown by a battery symbol on the navigation view
screen.
- remaining battery capacity
- battery charging
Recording: If an activity or timed route is currently being recorded, a corresponding symbol is displayed.
- activity currently being recorded
Info Field: Shows information about the calculated route. Tap on the field to be shown further information. For
example, you can also display the current altitude, the time or the gradient.
Map: Shows the map extract with your current position. If you want to move the map, tap on the Zoom button
. You can now move the map and zoom in or out using the plus and minus buttons.
You can then use the arrow to return to your current position.
To Next Page
Loading...
