Blaupunkt BikePilot2 - 14. Active Route and Position Saving; Active Route Options and Saving Location; 16. Waypoint Manager; Waypoint Operations

36
13.4.1 Edit tour
To edit a tour, first select a tour and then tap on .
Then tap on .
The following setting options are then available to you:
Edit stations – Here it is possible to add further stations,
change the sequence of the stations and delete stations again.
Set direction of travel – Here you can reverse the tour.
The
stations will then be navigated to in reverse order.
Edit name – Here you can edit the name of the tour.
Delete tour – Here the selected tour can be deleted.
14. Active Route
If you have calculated a route and are in navigation mode, you have the following options under
Active route:
- Calculate alternatives – Calculates two alternative routes.
- Enter stop-off point - Here you can enter a stop-off point which is navigated to before the destination which
has already been entered.
15. Remember position
If you want to save your current position for subsequent navigation, tap the Remember position
button. You can use this option to quickly and easily find your parking spot in an unfamiliar city, for
example.
For the position, initially the date and the time are displayed in the input field.
But you can also enter a name instead of the date.
You can use the delete button or back button to delete the address and enter a new name.
Tap on . The position is saved under Waypoints.
Note: If GPS reception is inadequate, the navigation device will save the position where GPS reception was last
available. If no last GPS position is available, no position can be saved.
16. Waypoint manager
Here it is possible to select, create and delete waypoints.
You can find the feature "Waypoint manager" under "Extras".
16.1 Choose waypoint
If you want to navigate to a waypoint, tap on Choose waypoint. Now specify the search centre you
want. The waypoints will then be displayed, sorted by their distance from this centre.
Alternatively, you can tap on Show all waypoints. All waypoints will then be displayed sorted in
alphabetical order.
Once you have selected a waypoint from the list, you can display the waypoint on the map by clicking on
navigate there directly by clicking on or call up the detailed view with a double-click.
The detailed view offers similar possibilities to the detailed view for a point of interest.