13
Boston CC22
DEUTSCH
ENGLISH
ITALIANO
PORTUGUES
NEDERLAND
ESPAGÑOL
SVENSKA
FRANÇAIS
Short description
1 ON/OFF
Switch the set on/off by turning the
knob.
If “Cod” appears on the display, read
the chapter “Anit-Theft Coding” first.
Volume control:
By turning the knob
SCAN (search operation):
During radio reception, the stations are
briefly sampled by pressing the knob for
approx. one second.
2
/ rocker switch
Radio: Automatical station tuning
Coding: Read first the “Anti-Theft
Coding” chapter.
: Press rocker switch
to confirm your code
entry.
3 << / >> rocker switch
For fine tuning of the stations
4 PS (Preset Station Scan)
Pressing this button briefly samples all
memorized stations of the selected
waveband (FM, MW, LW).
5 lo
Use this button to alter the sensitivity of
the automatic station seek operation.
lo lights up < - normal sensitivity
no indication - high sensitivity
Additional function:
Switching from stereo to mono:
Press lo longer than 2 seconds.
6 Cassette operation button
FF - Fast Forward operation
Start/stop: Press FF button briefly.
Ejection of the tape
Press button firmly.
7 Cassette compartment
8 Frequency indication
9 Indication of FM storage level
: Indication of preset button
; Stereo indication
< lo indication (seek tuning sensitivi-
ty)
= Indication of selected waveband
(FM, MW, LW)
> M•L (Medium wave - Long wave)
This button is used for selecting either
the medium wave (MW) or long wave
(LW) frequencies.
Press button again for shifting between
MW or LW.
? FM•T (Frequency Modulation)
This button is used for shifting between
the different FM storage levels I, II, III
and “T” (Travelstore - i.e. storing and
calling the five strongest stations of an
area).
Storing “T” - Press FM •T until the
seek tuning indication starts to be dis-
played.
Recalling “T” - Press FM•T ? until T
9 is indicated on the display. Then
briefly press the respective preset but-
ton.
To Next Page
Loading...
