Boston CC22
18
Amplifier Section
ON/OFF
For switching the set on,
• turn button 1
.
Your stereo is now ready for operation.
For switching the set off,
• turn button 1
.
Balance Control
Use button A to balance the sound impres-
sion of the right and left channel speaker.
Sound Control
Use the TONE button B to adjust the sound
according to your personal preference.
Radio Section
Selecting the Desired Waveband
With your car radio you have free choice from
the following wavebands:
FM (ultra-short wave; frequency-modulated),
MW (medium wave), and LW (long wave).
Selecting FM
• Briefly press the FM•T rocker switch
?.
“FM” lights up on the display =.
Selecting MW or LW
• Briefly press the M•L rocker switch >.
“M” for MW or “L” for LW lights up on
the display =.
For changing between MW and LW:
• Press the M•L rocker switch > once
again.
If nothing else is indicated, the following
operating notes hold for all wavebands.
Tuning in a Station Automatical-
ly
Tuning in the Following Station
• Press the upper part of the rocker
switch / 2.
The car stereo automatically starts
searching for the next station.
Tuning in the Previous Station
• Press the lower part of the rocker
switch / 2.
The car radio automatically starts
searching for the previous station.
If the rocker switch
/ 2 up/down is
kept depressed, the station seek opera-
tion continues to be carried out quickly
in the corresponding direction.
Manual Tuning
All stations can also be tuned in “manually”:
• Press the rocker switch <</>> 3 on
the left or the right. The frequency band
is scanned in small steps.
Adjusting the Station Seek
Sensitivity
With this set you can modify the station seek
sensitivity.
If you want to search for strong stations only
(reduced sensitivity):
• Press the lo rocker switch 5 until “lo”
lights up on the display <.
If you also like to search for weaker stations
(increased sensitivity):
• Press the lo rocker switch 5 until the
“lo” indication < goes off.
To Next Page
Loading...
