29
EN
Start Cleaning | Cleaning Modes
You can start your XPRO robot vacuum cleaner with ONE push at the
button on the robot or with your remote control. With the remote control
you can also select various cleaning modes.
Auto Cleaning
The most commonly used cleaning method is that the Robot uses a
bow-shaped (Zigzag) path to plan and clean the house according to the
actual home environment.
How to start Auto cleaning: In the shutdown state, press and hold the on/
o button, when the indicator light of the Robot is lit, it’s powered on.
When you short press the same on/o button now or press the automatic
cleaning button
on the remote control, the Robot starts automatic
cleaning.
To select the Robot super suction (Turbo) mode, Press the
once more.
Single Room Cleaning
Use to clean a single room
Click the “Change mode” button
on the remote control to start the
Single Room Cleaning
Remark: please close the door and the Robot will do centralized cleaning in
the room.
If this room does not have the docking station inside, the Robot will return
to the original starting point after cleaning.
Single Room Cleaning mode is always in super suction (Turbo) cleaning
mode.
Edge Cleaning
For indoor edge cleaning, the Robot cleans along the perimeter of xed
objects (such as walls), and returns to the docking station after the edge
cleaning is nished.
Click the “Change mode” button
on the remote control to select the
Edge cleaning mode to start the edge cleaning.
Manual Control
Suitable for manual control cleaning.
Click the “Direction” button on the remote control
to control the
Robot to direct the robot: left, right, front, back.
6. PRODUCT USE
To Next Page
Loading...
Need help?
General
