10
Switching on/off
There are various ways of switching the
device on/off.
Switching on/off using button
1
➮ To switch on the device, press but-
ton 1.
The device switches on.
➮ To switch off the device, press and
hold down button 1 for longer
than two seconds.
The device switches off.
Switching on/off using the
vehicle ignition
The device will switch on and off simul-
taneously with the ignition if it is con-
nected correctly to the vehicle’s ignition
and if it was not previously switched off
using button 1.
You can switch the device on even if
the ignition is off.
➮ Press button 1.
Note:
To protect the vehicle battery, the de-
vice will switch off automatically after
one hour if the ignition is off.
Adjusting the volume
You can adjust the volume in steps from
0 (off) to 50 (maximum).
➮ To increase the volume, turn the
volume control 2 clockwise.
➮ To decrease the volume, turn the
volume control 2 anticlockwise.
Setting the power-on volume
You can set the default volume level at
which the device plays when it is
switched on.
➮ Press the MENU button 9.
➮ Press the softkey 5 assigned to
the “VOLUME” display item.
➮ Press the softkey 5 assigned to
the “ON VOL” display item.
➮ Set the volume level that you want
using the volume control 2.
➮ Press the joystick OK 8 or the
MENU button 9 to close the
menu.
The settings are saved.
Note:
You can also set the power-on volume
to be the same as the volume level that
was active before you switched off the
device. To do so, press the softkey as-
signed to the “LAST VOL” display item
in the volume menu.
ADJUSTING THE VOLUME
SWITCHING ON/OFF
To Next Page
Loading...
