39
DANSK
ENGLISH
DEUTSCH
FRANÇAIS
ITALIANO
NEDERLANDS
SVENSKA
ESPAÑOL
PORTUGUÊS
➮ Press the softkey 5 assigned to
the “ADJUST” display item.
➮ Press the softkey 5 assigned to
the “MANUAL” display item.
You can adjust the equalizer for the front
and rear loudspeakers separately.
➮ Press the softkey 5 assigned to
the “FRONT EQ” display item for
the front loudspeakers or “REAR
EQ” for the rear loudspeakers.
The graphic equalizer settings are dis-
played.
To select the frequency,
➮ repeatedly press the joystick 8
left or right until the frequency that
you want is displayed.
➮ Adjust the gain for the frequency by
moving the joystick 8 up or down.
The values appear graphically in the
display whilst you are adjusting the
equalizer.
➮ Adjust all the settings for both
channels as described earlier on.
➮ Press the joystick OK 8 or the
AUDIO button : to close the
menu.
The settings are saved.
Selecting an equalizer
After calibration has taken place or af-
ter you have finished making manual
adjustments,
➮ press and hold down the AUDIO
button : for longer than two sec-
onds.
➮ Press the softkey 5 assigned to
the “USER EQ” display item.
➮ Press the softkey 5 assigned to
the display item of the equalizer
that you want to use.
➮ Press the joystick OK 8 or the
AUDIO button : to close the
menu.
The settings are saved.
Resetting the equalizer
You can reset all the automatically as-
certained values of the selected equal-
izer.
➮ Press and hold down the AUDIO
button : for longer than two sec-
onds.
➮ Press the softkey 5 assigned to
the “USER EQ” display item.
➮ Press the softkey 5 assigned to
the display item of the equalizer
that you want to reset.
➮ Press the softkey 5 assigned to
the “ADJUST” display item.
➮ Press and hold down the softkey
5 assigned to the “CLEAR” dis-
play item for longer than two sec-
onds.
The automatically ascertained values of
the equalizer are cleared.
➮ Press the joystick OK 8 or the
AUDIO button : to close the
menu.
The settings are saved.
DSA MAX EQUALIZER
To Next Page
Loading...
