Blaupunkt BREMEN SQR 46 DAB - Bluetooth Phone Book and Advanced Settings; Phone Book Management; Twin Connect and PIN Management

AUTORADIO
BEDIENUNGSANLEITUNG: BREMEN SQR 46 DAB
Bedienungsanleitung
Operating instructions
Mode d’ emploi
Istruzionl of uso
Gebruiksaanwijizing
Bruksanvisining
51
ENGLISH
2020
Bluetooth®
Press the rotary control again. You can now enter the PIN:
Turn the rotary control to select a digit for the respective position.
Press the rotary control to go to the next position.
Managing paired devices
In the Bluetooth® menu, you can manage the paired Bluetooth® devices
(cell phones and streaming devices such as MP3 player).
In the device lists for cell phones and streaming devices, the Bluetooth®
names of the paired devices are displayed. You can do the following:
R Disconnecting the connection to the currently connected Bluetooth®
device
R Establishing a connection to one of the paired Bluetooth® devices
R Unpairing Bluetooth® devices
R Select master telephone (for Twin Connect)
In the Bluetooth® menu, select the menu item "PHONE LIST" or "STREAM-
ING LIST".
Press the rotary control to open the menu. The rst device on the list
is displayed.
Note:
If no device ispaired,”EMPTY LIST” is briey displayed.
Turn the rotary control to select a diernet device or the "DELETE ALL"
option. You have the following options to connect the displayed device:
press the button
- or -
Press the rotary control to open the menu.
Select the "CONNECT" menu item.
Note:
The "CONNECT" menu item is shown only if the device is not connected.
As soon as the device is connected, “CONNECTED” is briey
displayed and you are returned to the device list.
Note:
If no connection can be established, the display briey shows
"CONNECT FAILED". If the device is already connected, the display
briey shows "CONNECT EXIST".
To disconnect the connection to the displayed device,
press the button
- or -
Press the rotary control to open the menu.
Select the "DISCONNECT" menu item.
Note:
The "DISCONNECT" menu item is shown only if the device is connected.
The display briey shows "DISCONNECTED" and you are returned to
the device list.
Note:
If the device was not connected, the display briey shows "NO CON-
NECTION".
To unpair the displayed device,
press the button for approx. 2 seconds.
- or -
Press the rotary control to open the menu.
Select the "DELETE" menu item.
Press the rotary control and the display briey shows "DELETED" and
you are returned to the device list.
Note:
If a telephone is unpaired, the numbers stored for this telephone and
a phone book transferred from this cell phone are automatically
deleted.
ENGLISH