Blaupunkt BREMEN SQR 46 DAB - Radio and DAB Mode Transitions and Features; Switching Between DAB and FM Radio; DAB PTY and Display Options; Radio RDS Features

AUTORADIO
BEDIENUNGSANLEITUNG: BREMEN SQR 46 DAB
Bedienungsanleitung
Operating instructions
Mode d’ emploi
Istruzionl of uso
Gebruiksaanwijizing
Bruksanvisining
39
88
Press the button FM1>FM2>FMT>AM to directly select desired
memory bank is displayed.
Press the button MENU for approx. 2 seconds to start scanning.
During the scan, the display alternately displays "SCAN" and
the current frequency as well as memory bank or station name.
Note:
R If you adjust a dierent reception area than “EUROPE ”, RDS is automati-
cally switched o . The station name continues to be shown on the
display. If you want to use radio stations with RDS features in your
region, switch on RDS in the user menu.
Note:
R You can adjust the scan time for each station (see the chapter "User
settings", section "Making settings in the "VARIOUS" menu", menu
item "SCAN TIME").
Note:
R
Up to 5 stations can be stored in each memory bank.
Radio mode
Scanning stations
Scanning all receivable stations of the waveband
With the scan function, you can scan either every receivable station or
every stored station of the current waveband.
The functions RDS and REGIONAL are activated and deactivated in the user
menu (see the chapter "User settings", section "Making settings in the
"TUNER" menu", menu items "RDS AF" and " REGIONAL").
The following memory banks are available in the di erent reception areas:
Tuning into a station
There are various ways of tuning into a station.
Starting station seek tuning
Press the button < / > to Auto search the station tuning.
Press the button / to Manually search
change the frequency
in decrements /increments.
Notes:
R For the reception area "EUROPE": In the FM waveband, only trac
information stations are turned into if the priority for trac
information（ ) is switched on.
R The sensitivity of seek tuning can be adjusted . In FM setting, the
sensitivity can be selected, Low or High.
Tuning into stations manually
Changing to radio mode or selecting a memory bank
Storing stations or calling stored stations
Select the desired memory bank.
If necessary, set the desired station.
Press the station button for approx. 2 seconds to store the
current station under the button.
1 - 5 >
- or -
Briey press the station button 1 - 5
> to call up the stored station.
ENGLISH
Region Memory banks
EUROPE FM1, FM2, FMT, AM
ASIA
FM1, FM2, FMT, AM
USA
SOUTH AMERICA
THAILAND
ENGLISH