Blaupunkt BREMEN SQR 46 DAB - Bluetooth Configuration and External Audio Input; Speed Dial Button and Streaming Mode Settings; Combined Playback and Volume Adjustment; Front AUX-IN Socket Connection

AUTORADIO
BEDIENUNGSANLEITUNG: BREMEN SQR 46 DAB
Bedienungsanleitung
Operating instructions
Mode d’ emploi
Istruzionl of uso
Gebruiksaanwijizing
Bruksanvisining
53
ENGLISH
22 22
Sound settings
Sound settings
The following sound settings can be changed inthe "AUDIO" menu:
R Adjusting bass and treble
R Setting the left/right volume distribution (Balance) or front/rear
(Fader)
R Adjusting the increase of bass at low volume (Loudness)
R Selecting a sound prole
R Selecting level and frequency of the preamplier output(Sub-Out).
R Adjusting the time delay for switching in an external amplier.
R Setting the 3-band equaliser
Calling and exiting the "AUDIO"
menu
Breiy press the MENU button to exit the menu.
Breiy press the MENU button to open the user menu.
Turn the rotary control until the "AUDIO" menu item is selected.
Press the rotary control to open the "AUDIO" menu.
Turn the rotary control until the desired menu item is selected.
Perform the setting (see the next section).
Notes:
R The menu is automatically exited approx. 15 seconds after the
last button activation and you are returned to the display of the
current audio source.
R To go back to the next higher-level menu, turn the rotary control
until the "<<<" option is selected and press the rotary control.
Making settings in the "AUDIO" menu
BASS
Bass level. Settings: –7 to +7.
Rotary bass control to change the setting until the desired level is
set.
TREBLE
Bass level. Settings: –7 to +7.
Rotary treble control to change the setting until the desired level is
set.
BALANCE
Left/right BALANCE distribution. Settings: L9 (left) to R9(right).
Rotary balance control to change the setting until the desired volume
distribution is set.
FADER
Front/Rear FADER distribution. Settings: F9 (front） to R9(rear).
LOUDNESS
Increase of bass at low volume. Settings: ON, OFF.
Press the rotary control to change the setting.
Turn the rotary control to change between the settings.
Press the rotary control to conrm the setting.
Press the rotary control to change the setting.
Turn the rotary control to change between the settings.
Press the rotary control to conrm the setting.
PRESET EQ (sound prole)
Selecting equalizer presettings. Settings: POP, ROCK, CLAS (classic), OFF (no
presetting).
Press the rotary control to change the setting.
Turn the rotary control to change between the settings.
Press the rotary control to conrm the setting.
SUB-OUT
Setting the level and frequency of the preamplier output.
Press the rotary control to open the menu.
Turn the rotary control to change between the following menu items:
– FREQUENCY (settings: 80/120/160 Hz)
– GAIN (settings: 0 to +7)
ENGLISH