Blaupunkt BREMEN SQR 46 DAB - DAB Tuner, Display, and Scrolling Settings; DAB Tuner Service Settings; Display Settings (Brightness, Language, Scrolling)

AUTORADIO
BEDIENUNGSANLEITUNG: BREMEN SQR 46 DAB
Bedienungsanleitung
Operating instructions
Mode d’ emploi
Istruzionl of uso
Gebruiksaanwijizing
Bruksanvisining
58
Note:
There are 729 colors can be selected for panel illumination through
changing the R/G/B value.
Making settings in the "VOLUME" menu
ON VOLUME
Setting the power-on volume. Settings: ON VOLUME (power-in volume; 1-
50) or LAST VOLUME (volume set last before switching o the car sound
sustem).
Danger!
High volume
The power-on volume can be unexpectedly high if the LAST VOLUME
setting is selected and a high volume was set the last time the radio was
switched o.
Always set the device to a moderate volume.
Press the rotary control to open the menu.
Turn the rotary control to switch between the menu items "LAST VOL-
UME" and "ON VOLUME" (power-on volume).
Upon selecting "LAST VOLUME":
Press the rotary control twice to conrm the setting.
Upon selecting "ON VOLUME":
Press the rotary control to change the setting.
Turn the rotary control to set the volume.
Press the rotary control to conrm the setting.
Setting the minimum volume for trac information
TRAFFIC VOL (trac information volume)
(reception area EUROPE only)
Setting the minimum volume for trac anouncements. Settings: 1 – 50.
Press the rotary control to change the setting.
Turn the rotary control to set the volume.
Press the rotary control to conrm the setting.
2727
User settings | Making setting in the “VOLUME” menu
Press the rotary control to change the setting.
Turn the rotary control to change between the settings.
Press the rotary control to conrm setting.
NIGHT
Select the panel illumination for night mode brightness value.
Settings:01-16.
Press the rotary control to change “ R ” setting.
Turn the rotary control to change the value between 0-8.
Press the rotary control to conrm setting.
then
COLOR
Change the panel illumination color .
You can change the R(RED), G(GREEN),B(BLUE) value to change the illumina-
tion color.
Press the rotary control to change “G” setting.
Turn the rotary control to change the value between 0-8.
Press the rotary control to conrm setting.
then
Press the rotary control to change “B” setting.
Turn the rotary control to change the value between 0-8.
Press the rotary control to conrm setting.