Blaupunkt BREMEN SQR 46 DAB - Volume, Traffic, and DAB Mode; Volume Control and Muting; Traffic Announcement Priority; DAB Digital Radio Operation

AUTORADIO
BEDIENUNGSANLEITUNG: BREMEN SQR 46 DAB
Bedienungsanleitung
Operating instructions
Mode d’ emploi
Istruzionl of uso
Gebruiksaanwijizing
Bruksanvisining
37
6 6
DAB mode
List selection
Press the button < to display the list of all received ensembles.
The display shows the current ensemble.
Press the button < to returns you to the list of ensembles.
Press the button > to display the services of the selected ensemble.
The rst service of the ensemble is shown on the display.
Press the button > to play back the service.
The selected service is being played. You are exiting the list selection.
Select the desired DAB memory bank.
If necessary, set the desired service.
Press the MENU button for approx.2 seconds to start scanning.
During the scanning, "SCAN" and the current service name are inter-
mittently shown on the display.
Briey press the MENU button to continue listening to the service
that is currently being scanned.
Press the station button 1-5 for approx. 2 seconds to store the current
service under the button
-or-
Briey press the station 1-5 to call up the stored service.
Press the button △/▽ or hold the button to select a dierent
ensemble.
Press the button
△/▽ once or several times or hold the button
pressed to select a dierent service.
Note:
Saving a service or calling up a saved service
Scanning services
Refreshing services received
Selecting an ensemble
You can directly select ensembles that you have received once already
(for this to work, the ensemble must be receivable).
Briey press the △/▽ button to change to the previous/next en-
semble. The rst available service in the ensemble is played.
Note:
With activated PTY function, long press the
△/▽ button to seach
the PTY programme type.
Ensemble seek tuning
You can nd new ensembles using seek tuning.
In DAB mode, seek starts with long press button / .
For this briey press </ > keys.
Long press DAB+ butto enter to List selection.
Selecting a service
After you have tuned into an ensemble, you can select a service from
the ensemble.
Services or ensembles, which have previously been received, can be
selected directly in lists without interrupting the ongoing playback (for
this purpose, the services/ensembles must be receivable).
You can use the scan function to play all the receiveable services briey.
To update the received service, read the section "Making settings in the "DAB
TUNER" menu", menu item "SERVICE SCAN" in the chapter "User settings".
ENGLISH
ENGLISH