Blaupunkt BTW-Pro - Factory Reset Procedure

21
9. Factory Reset
When the earbuds are in the pairing mode, ve times click the touch
button, and the factory reset when the red LED and blue LED turns
on for 1 second. At the same time, you will hear prompt tone and
turn off.
Five times click the touch button
Remarks:
• After factory reset, the paired list of both the earbuds as well as
earbuds and mobile phone will be deleted. The earbud does not
automatically reconnect the mobile phone and the other earbud
after turning on.
• After factory reset, when the earbud turns on again, it will
automatically enter the TWS pairing mode (red and white lights
ash slowly alternately). Both the earbuds will be paired automatically.
After TWS connection, left earbuds will continue to wait for pairing
with the mobile phone (red and white lights ash quickly alternately).
BTW-Pro