37
ENGLISH
DEUTSCH
FRANÇAIS
ITALIANO
NEDERLANDS
SVENSKA
ESPAÑOL
PORTUGUÊS
Tape deck operation
Starting tape deck operation
● If there is no cassette in the tape
deck,
➮ insert a cassette into the tape deck
with the open side facing towards
the right.
Cassette playback will begin with the
side facing upwards. The cassette sym-
bol will light up in the display.
● If there already is a cassette insert-
ed into the tape deck,
➮ press CD•C < repeatedly until
“CASSETTE” appears in the dis-
play.
Playback will resume on the side of the
tape which was played last.
Cassette eject
➮ Press 7.
The cassette will eject.
Changing cassette sides
➮ To switch from SIDE A to SIDE B
and vice versa, press FR 9 and
FF : at the same time.
Note:
Once the tape reaches the end, it will
automatically switch to the other side
(autoreverse).
Fast forward/rewind
Fast forward
➮ Press FF : until it clicks in.
“FORWARD” will appear in the display.
Fast rewind
➮ Press FR 9 until it clicks in.
“REWIND” will appear in the display.
Stopping fast forward/rewind
➮ Press the opposite button.
Playback will resume normally.
Note:
During fast forward/rewind, the radio
station you are currently tuned into will
play.
Traffic information during
cassette playback
If you activate the “TRAFFIC” function
(traffic information priority), your car
audio system will always be on stand-
by for traffic information. If a traffic an-
nouncement is received, cassette play-
back will be interrupted and you will hear
the message. For more information, re-
fer to the section on “Traffic information”.
TAPE DECK OPERATION
To Next Page
Loading...
Need help?
General
