Need help?Do you have a question about the Blaupunkt CLX 01 and is the answer not in the manual?
General| Resolution | 1920 x 1080 (Full HD) |
|---|---|
| Aspect Ratio | 16:9 |
| Response Time | 5 ms |
| Brightness | 250 cd/m² |
| Contrast Ratio | 1000:1 |
| Connectivity | HDMI, VGA |
Introduction to the manual, instructions for reading, and contact information for further questions.
Emphasizes prioritizing road safety, operating the device only when conditions permit, and being aware of emergency sirens.
Details on the CLX 01 monitor's specifications, including size, voltage, screen format, signal types, and camera connectivity.
Instructions on how to power the CLX01 unit on and off using the vehicle ignition or the MENU button.
Procedure for switching the display source between TravelPilot, cameras, and video inputs on the CLX01 monitor.
Guide on selecting different cameras (CAM1, CAM2, CAM3) sequentially using the CAM button on the CCU01.
Method to display video, TravelPilot map, or camera feeds on cabin monitors via CCU01 buttons.
Explanation of how to adjust picture settings for video and TravelPilot modes, including format options like NORMAL, CINEMA, FULL, WIDE.
Details on adjusting settings for the TravelPilot mode, mirroring the adjustment process for video mode.
How the monitor automatically switches to night mode based on vehicle lighting, requiring DIM connection.
Procedure to access and modify system settings, including camera setup configurations.
How to enter REAR VIEW CAMERA mode and select mirror or normal image display for the reversing camera.
Lists technical specifications such as operating voltage, current consumption, and output voltage for cameras.
Diagram showing the necessary clearance dimensions for connecting plugs to the device.
Provides the precise dimensions required for creating the mounting cutout in the vehicle.
Recommendations for selecting appropriate screws and materials compatible with the mounting hardware.
Illustrates the complete wiring diagram showing how to connect the monitor to various components.
Details the remote control cable for CCU/CLX, including its length and functions (Map, CAM, Video).
Specifies the RGB cable, its part numbers, and lengths for connecting to the TravelPilot.
Lists the sizes of LCD monitors compatible with the system, such as 6.4", 12.1", and 17".
Indicates the connection for permanent positive power supply at terminal 30.
Specifies the connection for ignition-positive power supply at terminal 15R.
Identifies the type of connectors used for various connections as Molex Serie MicroFit 3.0.
Labels and identifies the different connectors shown in the installation diagrams.
Lists contact phone numbers and email addresses for customer service and support organized by country.
To Next Page
