Navigation Function | Phone Feature
Dialling
After the mobile is connected to the unit successfully,
input a series of numbers via the numeric buttons on
the screen, and then tap the icon [Å] to make a call.
During dialling, if a wrong number was input, you may
tap the icon [ ] to delete one by one, or long-press the
icon [ ] to delete all. As is shown in below interface:
You may also make a call via your mobile directly.
Touch the [ ] icon, the numeric keyboard will pop up.
Touch this icon again & the number keyboard will
disappear;
Touch the [ ] icon to hang up a call.
Tap the [ ] icon to switch call audio between mobile
microphone and car audio.
Tap the [ ] icon to activate Mute mode.
You may also hang up a call via your phone directly.
Answer a call
When there is an incoming call, the system will switch
to Bluetooth interface automatically
As shown in the interface below:
Tap the [ ] icon to answer a call.
You may also answer or refuse a call via your mobile
directly.
View Call History
Tap the [ ] icon in Bluetooth interface to enter the call
history interface as shown below:
Touch the [ ] icon to switch between Outgoing call /
Missed call / Incoming call.
View Phone Book
Touch the [ ] icon in Bluetooth mode to enter the
below interface.
Note: After Bluetooth is connected successfully, the
system will send a request message to the mobile
[Android would like to access your contacts and call
history. Give access to Android?] Press Yes on your
mobile, the unit will begin to download the phonebook;
After downloading successfully, the call history &
phonebook of the mobile will display on the unit.
14
To Next Page
Loading...
