EasyManua.ls Logo

Blaupunkt Dakota CD31 - Fast Search (Audible); Playing Tracks in Random; Sequence (MIX); Sampling Tracks (SCAN)

Blaupunkt Dakota CD31
19 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
13
FRANÇAIS
ENGLISH
ESPAÑOL
PORTUGUÊS
Fast Search (Audible)
To search rapidly backwards or forwards
Hold down one of the buttons
9 until fast searching begins.
Playing Tracks in Random
Sequence (MIX)
Press button 4 (MIX) ;.
“MIX” appears in the display. The next
track is played at random.
Ending MIX function
Press button 4 (MIX) ; again.
“MIX” disappears from the display.
Sampling Tracks (SCAN)
To listen to a short sample of each track
on the CD
Press the SCAN button 4.
Note:
The lengths of these samples can
be set. Please consult the section
on “Setting Scan Time” under “Ra-
dio Operation”.
Ending SCAN, Continue Listening to
Track
To halt the scan
Press SCAN 4 again.
The track currently being sampled will
continue to play.
Repeating Tracks (REPEAT)
To repeat a track
Press button 3 (RPT) ;.
“RPT” appears in the display. The track
is repeated until RPT is deactivated.
Stopping REPEAT
To stop the repetition of the current track
Press button 3 (RPT) ; again.
“RPT” disappears from the display and
normal play resumes.
Pausing During Play
Press button 2 ;.
“PAUSE” appears in the display.
Continuing after the pause
Press button 2 ; again.
Play resumes.
Changing Display Contents
To change the display between track
number and track number plus play time
Press the MENU button :.
Press the or button 9 until
“CD DISP” appears in the display.
Press the button.
The current display mode is shown:
“TIME” for play time and “PLAY” for track
numbers.
Select the desired setting with the
button 9.
Press the MENU button : twice.
Removing CD from Player
To remove a CD from the player
Hold the CD•C button 7 pressed
down until the CD is ejected.
CD OPERATION

Table of Contents

Related product manuals