14
CD Changer Operation
Note:
● For information on handling CDs,
inserting them and operating the
CD changer, please consult the op-
erating instructions for your CD
changer.
Starting CD Changer Operation
➮ Press the CD•C button 7 until
“CHANGER” appears in the dis-
play.
Play will start with the first CD that the
CD changer recognises.
Selecting a CD
To change up or down to a different CD
➮ Press the or button 9 one or
more times.
Selecting a Track
To change up or down to a different track
on the current CD
➮ Press the or button 9 one or
more times.
Quick Track Selection
To skip tracks backwards or forwards
➮ Hold down the or button 9
until skipping backwards or for-
wards begins.
Fast Search (Audible)
To search rapidly backwards or forwards
➮ Hold down one of the buttons
9 until fast searching begins.
Changing Display Contents
To change the display between track
number plus CD number and track num-
ber plus play time
➮ Press the MENU button :.
➮ Press the or button 9 until
“CDC DISP” appears in the display.
➮ Press the button 9.
The current display mode is shown:
“TIME” for play time and “CD NO” for
CD number.
➮ Select the desired setting with the
button 9.
➮ Press the MENU button : twice.
Repeat Playing Tracks or Whole
CDs (REPEAT)
To repeat the current track
➮ Press button 3 (RPT) ; briefly.
“RPT TRCK” flashes up briefly and the
display shows “RPT”.
To repeat the current CD
➮ Press button 3 (RPT) ; again.
“RPT DISC” flashes up briefly and the
display shows “RPT”.
Stopping REPEAT
To stop the repetition of the current track
or CD
➮ Press button 3 (RPT) ; until the
display shows “RPT OFF” and
“RPT” disappears.
CD CHANGER OPERATION
To Next Page
Loading...
