Blaupunkt Dakota CD31 - Playing Tracks in Random; Sequence (MIX); Sampling All Tracks on All Cds (SCAN); Pausing During Play

15
FRANÇAIS
ENGLISH
ESPAÑOL
PORTUGUÊS
Playing Tracks in Random
Sequence (MIX)
To play the tracks of the current CD in
random sequence
➮ Press button 4 (MIX) ; briefly.
“MIX CD” flashes up, the display shows
“MIX”.
To play the tracks of all the CDs in the
CD changer in random sequence
➮ Press button 4 (MIX) ; again.
“MIX ALL” flashes up and the display
shows “MIX”.
Ending MIX function
To end the playing of tracks in random
sequence
➮ Press button 4 (MIX) ; until the
display shows “MIX OFF” and
“MIX” disappears.
Sampling All Tracks on All CDs
(SCAN)
To listen to a short sample of all tracks
on all the CDs in the CD changer
➮ Press the SCAN button 4.
“SCAN” appears in the display.
Ending SCAN
To halt the scan
➮ Press SCAN 4 again briefly.
The track currently being sampled will
continue to play.
Note:
● The lengths of these samples can
be set. Please consult the section
on “Setting Scan Time” under “Ra-
dio Operation”.
Pausing During Play
➮ Press button 2 ( ) ;.
“PAUSE” appears in the display.
Continuing after the pause
➮ Press button 2 ( ) ; again.
Play resumes.
CD CHANGER OPERATION