18
External Audio Sources
Instead of the CD-changer, you can
connect a different external audio
source that has a line output (not for
Dakota CD31). Such sources include
portable CD, MiniDisc or MP3 players.
To connect an external audio source,
you need an adapter cable (Blaupunkt
No. 7 607 897 093).
The AUX input must be switched on in
the menu.
Switching AUX input on and off
➮ Press the MENU button :.
➮ Press the or button 9 until
“AUX OFF” or “AUX ON” appears
in the display.
➮ Press the or button 9 to
switch AUX on or off.
➮ When setting is complete, press
the MENU button :.
Note:
● If the AUX input is switched ON, it
can be selected via the CD•C but-
ton 7.
Technical data
Amplifier
Output power: 4 x 25 Watt sine
wave according
to DIN 45 324
at 14.4 V
4 x 50 Watt
max. power
Tuner
US Wavebands:
FM: 87.5 - 107.9 MHz
AM: 530 - 1710 kHz
Asian and European Wavebands:
FM: 87.5 - 108 MHz
AM: 531 - 1602 kHz
Thai Wavebands:
FM: 87.5 - 108 MHz
AM: 531 - 1629 kHz
FM mono sensitivity: 15 dBf
FM frequency response:
35 - 16,000 Hz
CD
Frequency response: 20 - 20,000 Hz
Pre-amp out (Santa Fe CD31)
4 channels: 4 V
Input sensitivities
(Santa Fe CD31)
AUX input: 2 V/ 6 kOhm
Subject to technical change!
EXTERNAL AUDIO SOURCES TECHNICAL DATA
To Next Page
Loading...
