If the power cable is damaged the product should be taken
to a professional service location to be fixed or replaced to
prevent any hazards from arising.
Never use the product with a damaged power cable or if it
was dropped or damaged in any other way or if it does not
work properly. Do not try to repair the defected product by
yourself as it can lead to electric shock. Always return the
damaged device to a professional service in order to repair it.
All the repairs should only be performed by authorized
service professionals. Any attempted unauthorised repairs
performed can be a hazard to the user.
Only Original accessories should be used, as well as
accessories recommended by the manufacturer. Using
accessories which are not recommended by the
manufacturer may result in damage of the device and may
render the device unsafe for use.
Do not place the oven directly under an electric socket. Do
not place the power cord above the oven. The power cord
cannot touch the hot surfaces of the oven.
The oven should be placed on a surface that is resistant to
high temperatures. Leave sufficient space for ventilation (10
cm on each side of the oven and at least 30 cm above the
oven).
Do not put dishes inside the oven which occupy the entire
capacity of the oven or significantly limit the air flow in the
oven.
Do not use the oven with the door open or half-opened.
Do not use wire wools or similar accessories for cleaning the
oven. Broken wire wool fragments pose a risk of electric
shock if they touch electrical parts of the device.
EOM401
3
To Next Page
Loading...
