Blaupunkt GTA 475 - Input Function and Specifications; Input Function Overview; Power and Indicators; Amplifier Specifications

2
• Amplifier Class : Class AB
• No of Channel : 4/3/2
• No of PCB Layer : 2
• Max Total Power : 160W x 4
• RMS Power (4 ohms) : 75W x 4
• RMS Power (2 ohms) : 120W x 4
• Frequency Response : 10Hz - 50kHz
• Signal-To-Noise Ratio : ≥ 96dB
• Voltage Supply : 11- 16V DC
• Idling Current : 0.8A
• Gain Adjust : 200mV - 6V
• Crossover Type : Variable LPF
• Crossover Slope : -12dB/oct
• Max Total Power Bridged (4 ohms) : 240W x 2
• Crossover Frequency (Low Pass Filter) : 32Hz - 250Hz
• Crossover Frequency (High Pass Filter) : 20Hz - 250Hz
• Hi-Volt Input Level Control : 3V
• Lo-Volt Input Level Control : 200mV - 6V
• Total Harmonic Distortion : ≤ 0.05%
• RCA Input : 4 Channel
• Speaker Input : Yes
• Fuse : 40A x 1
• Power/Ground Terminal : Screw-Type
• Speaker Terminal : Screw-Type
• Net Weight : 2.85kg
• Dimension (W x H x D) : 260 x 165 x 58.5mm
SPECIFICATION
INPUT FUNCTION
11. POWER
12. PRO/PWR Indicator
13. CH3/CH4 Output
14. CH1/CH2 Output
1. CH3/CH4 Gain Control
2. HPF OFF/ON
3. HPF Control
4. LPF OFF/ON
5. LPF Control
6. CH1/CH2 Gain Control
7. 2CH/4CH Input Mode
8. 4 Channel RCA Input Jack
9. CH3/CH4 High Level Input
10. CH1/CH2 High Level Input
1
2
4 5 6 7
8
9 10
11 12 13 14
3