114
“Free entries” in the display indicates the
number of free entries still available in the
memory bank.
If there are no entries available, “memory
full” will appear in the display.
Show my phone number
You can display your own telephone number
if it has been saved.
• Press / to select “Show my phone
number” and press OK.
Access
Capacity
My number
If more than one number appears, press
/ to select the correct one.
Setup menu
Use this menu to alter the basic system set-
tings.
• Press / to select “Setup”.
• Press OK.
Ring. tones
My number
AOC param.
Audib. timer
PIN-code
Ext. Alarm
TA/Call
A maximum of four menu items will appear
in the display. Press
/ to select the menu
item you wish to alter.
Return to the menu (from any menu item):
• Press CL.
Volume
The volume can be adjusted separately for
the following functions.
• Press / to select “Volume” and
press OK.
Ringing tone
Press << / >> to adjust the volume of the
ringing tone from between 0 and 9. 0 = off.
If the automatic answer function is switched
on, the volume cannot be set to “0”.
Hands-free (volume)
Press << / >> to adjust the volume of the
incoming call over the car speakers from 0
to 63.
Handset (volume)
This menu item will not appear unless a
Blaupunkt handset has been connected to
the system.
Press << / >> to adjust the volume of the
handset from 1 to 10. Remove the handset
from the cradle to check the setting.
Programming with DSC – Setup
Helsinki gb2 12.06.2002, 10:49 Uhr114
To Next Page
Loading...
Need help?
General
